Showing 1–12 of 19 results

Clack control valve V1TT1CIDM WS1 CI Twin

695.00 
Clack control valve V1TT1CIDM WS1 CI Twin
  • Domestic softening
  • Small industrial softening
  • Small public places
Options
  • Permanent softened water
  • One valve for 2 tanks
  • Upstream and downstream regeneration
  • Compact
  • Regeneration with softened water à power 100% protected

Clack control valve V1TT1EIDM WS1 El Twin

675.00 
Clack control valve V1TT1EIDM WS1 EI Twin
  • Domestic softening
  • Small industrial softening
  • Small public places
Options
  • Permanent softened water
  • One valve for 2 tanks
  • Upstream and downstream regeneration
  • Compact
  • Regeneration with softened water à power 100% protected

Clack V1CIDM WS1 CL Control Unit Regenerative – Meter (Softener/KMnO)

355.00 
The Clack WS1 automatic valve is a modern control head designed for residential and commercial applications requiring flow rates up to 6.1 m³/h. It has a backwash capability capable of handling tanks up to 21 inches in diameter.

Clack V1EIDM WS1 EI Control Unit Regenerative – Meter (Softener/KMnO)

315.95 
The Clack V1EIDM WS1 control valve with time and flow flushing is used in water softening systems. Serves for effective control of charging filter operating modes with the help of timer and counter. Supports multi-level settings to suit most water treatment system requirements. Capable of handling cylinders up to 21" in diameter for maintenance and backflushing.

Clack WS1 Meter Unit Turbine V3003

66.99 
Replacement assembly for Clack 4 or 5 button valves. Easy replacement.

Clack WS1TC control valve for backwash filtration systems (backwash only) V1TCBTZ

279.40 
V1TCBTZ Clack filter control valve for chlorine, chloramines, NextSand and other backwash applications with a flow rate of 27 gpm

Riser pipe hold down CLAMP 1″, D1301

13.50 
Working pressure: 20 - 125 psi 1.4 - 8.6 bar Temperature ranges: 40 - 110°F 4 - 43°C Install on cold water supplies only This clamp will hold the distributor tube in the correct position in the mineral tank and prevent the lower distributor from lifting up when the control valve is removed for service. The clamp holds the riser tube in the center of the tank for proper connection to the control valve. It is designed to allow the upper baskets of the divider to be used as well. The riser holding clamp also spreads the water over the material bed for better spreading and less chance of diversion. Ideal for holding the riser pipe in place when the filter system head is removed for inspection or material changes. It can be installed in any system with 1" riser pipe - please ask if you want one installed when buying a complete system