The polypropylene cartridge is intended for water purification from mechanical impurities – sand, silt, dirt, rust.
Protects plumbing and piping from damage.
The outer pretreatment layer traps larger impurities. This helps reduce the stress on the inner layer which traps the smallest mechanical particles.
This structure allows the cartridge to efficiently purify water at a higher rate with less pressure drop.
MAIN ADVANTAGES
- Resource 30,000 liters;
- Resource and dirt holding capacity is 3 times higher than standard polypropylene cartridges;
- Low pressure loss;
- Works effectively even in turbid water;
- Saves space – one can be installed instead of several units.
USERS
A family of up to 4 people living in an apartment or house with 1 bathroom.
WHAT CHANGES WILL HAPPEN AFTER PURCHASING THE FILTER?
- You will enjoy showering or bathing in clean water;
- Shower cabins, hot tubs and shower head nozzles will no longer clog and will have good pressure;
- Your home appliances, heating system and plumbing will last longer;
- Your kitchen drinking water filter cartridges will need to be changed less often.
How the filter works?
The cartridge is a porous cylinder made of expanded polypropylene.
The required degree of mechanical strength is achieved without using a core by sintering the fibers into a rigid structure.
During cleaning, the particles of the material retain mechanical impurities, and clean water is supplied to the consumer.
Service
The Ecosoft 2.5″x10″ mechanical cleaning cartridge is designed for cold water treatment only.
The cartridge is not intended for the treatment of microbiologically contaminated water without proper disinfection of the source or treated water.
The resource of the cartridge depends on the quality of the source water.
Do not exceed the recommended filtration rate, this may lead to a deterioration in the quality of water treatment.
To obtain clean water, the cartridge must be changed at least once every 6-9 months.
|
Inlet water temperature: |
+3 – +43 °С |
| Size: | 2,5″ × 10″ |
| Degree of filtration (outer layer / inner layer), microns: | 20 / 5 |
|
Height, mm: |
250 ± 2,0 |
|
Outer diameter, mm: |
60 ± 2,0 |
|
Recommended filtration speed, l/min: |
8 |
| Material: | polypropylene fiber |








Reviews
There are no reviews yet.