The automatic control valve is the central part of the water treatment plant.
It provides full automation of water preparation and filter material regeneration, controlling the water flow according to the current stage of the work cycle.
The control valve uses a programmable controller on a printed circuit board, which accepts user commands and provides the user with information about the operation of the equipment through an LCD display.
Ecosoft® WS automatic control valves are made of plastic (noril) (WS1, WS125) or bronze (WS15, WS2). Ecosoft valves are resistant to a large number of reagents used for water recovery and purification. Valve design
optimized for high performance both in and out of service mode
washing mode. The regeneration procedure can be started “by volume” (after treatment of the calculated amount of water, also called system resource) and/or “by time” (on a certain day and hour). When the power is off, the controller keeps the current time until the lithium battery is discharged. If the current time is lost after a long power outage, it must be entered into the controller.
Ecosoft CE control valve supports 4 languages (English, German, Ukrainian, Russian).
Programming of the control valve may only be done by specialized personnel!
The control valve has 3 programming menus and 2 diagnostic menus that allow
configure it to perform various tasks:
1. “System Configuration”
2. Softener/Filter Settings
3. “Installer settings”
4. “Control valve operation diagnostics”
5. “Control valve operation log”
Reviews
There are no reviews yet.