The cartridge is designed to purify water from mechanical impurities – sand, silt, dirt, rust.
Provides protection for plumbing and pipelines from damage.
The outer pre-treatment layer traps larger impurities. This helps reduce the load on the inner layer, which traps the smallest mechanical particles.
This structure allows the cartridge to effectively purify water at higher speeds with lower pressure drop.
MAIN ADVANTAGES
- Resource up to 300,000 liters
- Resource and dirt holding capacity are 3 times higher than standard polypropylene cartridges
- Low pressure loss
- Works effectively even with fluctuations in turbidity
- Saves space – you can install one filter instead of several
USERS
A family of up to 7 people living in an apartment or house. The cartridge is installed in a BB20 type flask
WHAT CHANGES WILL HAPPEN AFTER PURCHASING A FILTER?
You will enjoy taking a shower or bath in clean and clear water.
The nozzles of the shower cabin, hydromassage bathtub and shower head will no longer become clogged and will delight you with good pressure.
Your appliances, heating system and plumbing will last longer.
The cartridges in your kitchen drinking water filter will need to be replaced less frequently.
How the filter works
The cartridge is a porous cylinder made of foamed polypropylene.
The required degree of mechanical strength is achieved without the use of a core by sintering the fibers into a rigid structure.
During cleaning, material particles retain mechanical impurities, and clean water is supplied to the consumer
Service
Ecosoft BB20 mechanical cleaning cartridge is intended for cold water purification only.
The cartridge is not intended for purification of microbiologically contaminated water without proper disinfection of the source or purified water.
The cartridge life depends on the quality of the source water.
Do not exceed the recommended filtration rate, as this may lead to a deterioration in the quality of water purification.
To obtain clean water, the replacement cartridge must be changed at least once every 6 months.
Water temperature, °C: | +3 – +43 |
Size: | 4,5″ × 20″ |
Filtration rating (outer layer / inner layer), µm: | 20 / 5 |
Height, mm: | 510 ± 2,0 |
External diameter, mm: | 114 ± 2,0 |
Recommended filtration rate, l/min.: | 30 |
Material: | polypropylene fiber |
Reviews
There are no reviews yet.