Ion exchange resin Ecosoft Ecolite CK 25 l
Main advantages:
- Soft water in every faucet;
- The material is used in the water softening filters for the whole house or apartment;
- Household appliances without scale and plumbing without white stripes;
- Effective reduction of the water hardness;
- Solves the problem of hard water permanently;
- At least 3 years of reliable resin performance;
- The material is economical in operation;
- Economical consumption of salt and water for regeneration.
SKU:
ECOLITE25
Categories: Filter materials and reagents, Items
Description
Ecolite CK is a strong acidic cation exchange resin developed by Ecosoft for use in domestic, commercial and industrial water softening systems and boiler water treatment.
This resin has a high exchange capacity which provides excellent performance and the ability to effectively remove hardness salts. The material is physically, chemically and thermally stable.
How does it work
In the process of filtering the water through a cation exchange hardness ions Ca2+ and Mg2+ are replaced by Na+ ions.
Replacing calcium and magnesium ions with sodium ions guarantees that scale will not form on the heating surfaces of boilers and heat exchangers. As the water passes through the cation exchange layer, the amount of exchangeable sodium ions decreases and the amount of calcium and magnesium ions retained on the resin increases. After that it should be regenerated – omit the sodium chloride substance through the cation exchange layer to restore the cation exchange capacity.
During the regeneration calcium and magnesium ions are flushed down the drain and the cation exchanger is saturated with sodium ions from the brine.
Recommended operating conditions
- maximum working temperature: 120°C
- pH range: 0-14
- layer height, min.: 600 mm
- flow rate:
- duty cycle/quick rinse: 25-40 m/h
- backwash: 10-15 m/h
- regeneration/displacement: 1-10 m/h
- total water consumption for rinsing: 3-6 rpm
- regeneration solution: 8-10% NaCl
Specification:
| Full exchange capacity, g-eq/l (min.): | 1,8 |
| Moisture content, %: | 50-55 |
| Effective grain size, mm: | 0,52 |
| Bulk mass, g/l: | 800 |
Reviews (0)
Be the first to review “Ion exchange resin Ecosoft Ecolite CK 25 l” Cancel reply
You must be logged in to post a review.
Related products
CMV2510ECO Ecosoft cartridge with ion exchange resin (Na +) 10SL 2,5×10′
8.47 €
ECOSOFT MO10000 COMPACT COMMERCIAL TYPE REVERSE OSMOSIS SYSTEM 500L/H.
ELP-4040 ECOSOFT MEMBRANE ELEMENT 4″
225.00 €
Ecosoft 4″ ELP‒4040 is a high performance, low energy consumption membrane element.
Suitable for treating water with medium mineralization - up to 2000 mg/l. Allows to obtain high quality water at low operating costs.
The Ecosoft 4″ ELP‒4040 membrane element operates at the lowest pressure required for reverse osmosis, which reduces energy costs.
Main advantages:
- High energy efficiency due to low working pressure
- Maximum active area of the membrane element due to automated high-precision manufacturing
- Works in a wide pH range from 3-11
FILTER MATERIAL ECOMIX A 12l
FILTER MATERIAL ECOMIX A 25l
PSE2005ECO, ECOSOFT SCALEX CARTRIDGE FOR HEATING BOILERS
The Ecosoft SCALEX Ecozon anti-limescale filter cartridge is made using a unique technology that has a complex effect on hardness salts and prevents them from accumulating on boilers and boiler heating elements.
The filter does not contain phosphates, hypoallergenic for humans. On the nylon mesh of the cartridge, sand, sludge, scale, rust and other mechanical suspensions with a size of up to 100 microns are retained, which provides additional protection for the boiler
Pure Resin PA510 — Anion Exchange Resin for Organic Removal
245.00 €








Reviews
There are no reviews yet.