Description.
1.5″ CE Valve Kit (V15CEDT):
CE Control Valve 1.5″
1.5 inch meter assembly
Upper pile separator, 50 mm insert
Drain fitting 1″
Power supply
Injector, DLFC – for Ecomix and cation exchange resins
Funnel
Valve Operating Instructions, Operating Instructions
Pressure tank kit
Pressure tank 30×72.4″
Adapter 4″-2″
Riser DN 50 mm
Bottom pile guide TMHL 30, 50 mm solvent
Salt tank assembly
Brine tank 30×50, 570 l
MAIN CHARACTERISTICS OF CE CONTROL VALVES
Regeneration control by water volume: delayed regeneration, immediate, both
Possibility of changing the cycle of regeneration stages and their time range.
Multilingual menu: English, German, French, Ukrainian.
Various setting modes are available:
– Twin or duplex configurations
– Up to 6 systems per system controller
– You can connect 2 external devices at the same time
SPECIFICATIONS.
Water consumption*
– Service (pressure drop 1 bar) – 15.9 m3/h
– Backwash (pressure drop 1.7 bar) – 11.8 m3/h.
Inlet, outlet – G 1.5″
Drain – G 1″
Brine line – G 3/8″
Pressure – 2-6 bar
Temperature +4…+30 оС
Electrical requirements – 230 V, 50 Hz
Power – 30 W
Hydraulic tank volume – 697 l.
Brine volume – 570 l.
The volume of the rounded side is 80 l.
Dimensions, H×W×D: 2280 x 1720 x 800 mm
Filter weight 110 kg.
*Only Clack WS1.5 CE control valves are equipped with a meter.
RECOMMENDED MEDIA VOLUME
C type filter material – 425 l ***
A type filter material – 425 l ***
P type filter material – 425 l ***
HCRS-S Strong acid cation exchanger – 450…500 l
PC002 Strong acid cation exchanger – 450…500 l
The volume of filter material depends on its properties. TDS for filter media can be found on the official website www.ecosoft.com.
***The volume of Ecomix can be increased by no more than 25 liters.
ACCESSORIES**
V3017 – WS2 Service or Refill Switch Kit
V3097BSPT – WS1.5 inch, no hard water bypass, male x female BSPT thread
V3071BSPT – MAV 1.5 BSPT 2 Review
V3040BSPT-15 – WS1.5 meter unit, male x female NPT cable, 15 inches
Reviews
There are no reviews yet.