ECOT301010, Ecosoft Ecotec 3010 antiscalant 10kg
8.50 € Original price was: 8.50 €.7.65 €Current price is: 7.65 €.
Z-99135150-60BASIC Grundfos DDC 6—10 basic dosing pump set (without pulse meter)
2,235.00 € Original price was: 2,235.00 €.1,788.00 €Current price is: 1,788.00 €.
Z-D100660 PERMANENT DOSING STATION ECOSOFT
915.00 €
Ecosoft constant dosing station D100660 is aqueous solution tank equipped with a dosing pump for constant injection of small portions of solution into the water stream. The pump parts are resistant to aggressive substances and protected from clogging.
Available on back-order
SKU:
D100660
Categories: Industrial systems, Commercial reverse osmosis systems, Industrial reverse osmosis systems, Items
Description
The Ukrainian brand Ecosoft permanent dosing station D100660 capacity is 0.1 – 1.0 l / h and the volume of the tank for storing the solution is 60 liters. The dosing station is used in water treatment, for example:
- pH regulation;
- stabilization of the mineral composition of the water;
- for reagents of narrow significance (antiscalants and biocides).
The dosing station is protected against the overvoltage. It is possible to adjust the frequency of feeding the aqueous solution. The pump material is resistant to aggressive substances. The pump is equipped with a bottom filter that prevents the undissolved particles to enter the dispenser during suction (this also prevent dispenser from clogging).
How the dosing station works
The tank contains the reagent solution you are working with. When using a dosing pump, equal amounts of solution are injected into the water stream at the intervals that are set before.
Service
Do not let the reagent tank run out of the solution. Periodically rinse the bottom filter which is installed on the suction valve of the dosing pump. If you plan to change the reagent, it is necessary to rinse all the parts of the installation.
| Temperature limit within the premises, °C: | 0 – +45 |
| Temperature limit during storage / transportation, °C: | -10 – +50 |
| Suction height (max), m: | 1,5 |
| Maximum back pressure (Pmax), bar: | 3 |
| Material of components which contact with the dosing substance: | FPM (Viton B) or EPDM |
| Nominal back pressure (Pnom), bar: | 1,5 |
| Reagents tank volume, l: | 60 |
| Volume of one injection, l: | 0,72 |
| Energy consumption, W: | 16 |
| Flow rate at Pmax, l/h: | 6,5 |
| Flow rate at Pnom, l/h: | 7,5 |
| Dosing mode: | constant |
| Temperature of dosing solutions, °C: | 50 |
| Noise level, dBA: | 74 |
| Current frequency, Hz: | 50 |
| Power supply, V: | 230 |
The kit includes: dosing pump / bottom filter with suction valve / injection valve / set of pipes for connection / reagent solution tank.
| Tank height, mm: | 640 |
| Dosing pump height , mm: | 155 |
| Dosing pump depth, mm: | 125 |
| Tank diameter, mm: | 370 |
| Dosing pump width , mm: | 95 |
Reviews (0)
Be the first to review “Z-D100660 PERMANENT DOSING STATION ECOSOFT” Cancel reply
You must be logged in to post a review.
Related products
ECOSOFT MO10000 COMPACT COMMERCIAL TYPE REVERSE OSMOSIS SYSTEM 500L/H.
ELP-4040 ECOSOFT MEMBRANE ELEMENT 4″
225.00 €
Ecosoft 4″ ELP‒4040 is a high performance, low energy consumption membrane element.
Suitable for treating water with medium mineralization - up to 2000 mg/l. Allows to obtain high quality water at low operating costs.
The Ecosoft 4″ ELP‒4040 membrane element operates at the lowest pressure required for reverse osmosis, which reduces energy costs.
Main advantages:
- High energy efficiency due to low working pressure
- Maximum active area of the membrane element due to automated high-precision manufacturing
- Works in a wide pH range from 3-11
FPV4520ECO Ecosoft mechanical filter BigBlue Gross BB20 1″
Industrial systems, Industrial main filters, Household water filters, Main water filters, With a cartridge, Items
58.80 €
- Clean water for daily household needs in the apartment
You can choose a cartridge that will deal with the contaminants specific to your water - Protection of clean water, household appliances, plumbing, pipes and main filter in the bathroom
The mechanical cleaning cartridge traps sand, rust, clay, silt - Water without the smell of chlorine and hydrogen sulfide
Carbon cartridge removes unpleasant odors - Suitable for a family of up to 7 people
Maximum capacity 83 liters per minute
LC-LE-4040 Membranes FilmTec (DOW)
590.00 €
FILMTEC™ LC LE-4040 membrane element is intended for commercial use. Suitable for the production of high purity water and guarantees the low cost of the water treatment system.
FILMTEC™ LC LE-4040 delivers high permeate quality even at low feed water quality and low pressure.
MAIN ADVANTAGES
The world standard for water purification is the FILMTEC™ membrane (USA)
Efficient removal of silicon compounds, nitrates and ammonium
High active element surface area allows for greater performance
Automated high-precision production
MO4TP5 Industrial reverse osmosis system Ecosoft MO4 (without membranes)
19,130.00 €
Ecosoft MO4 industrial reverse osmosis system is a turnkey solution for industrial water challenges, that includes pilot studies, engineering and manufacturing, commissioning and maintenance.
Ecosoft reverse osmosis systems are used in food and pharmaceutical industry, energy, chemical, semiconductor manufacturing, steam boilers and other industrial applications.
Polyethylene tank CPN-1000 ELBI
675.00 €
LHDPE polyethylene tank for storing liquids
A durable plastic tank suitable for storing drinking water, food-grade liquids and various chemicals. The tank is made of food-grade LHDPE polyethylene, which does not contain harmful substances and helps protect the tank contents from the effects of UV radiation.
The tank can be used for liquids with a temperature of up to +60 °C. When storing liquids with a temperature higher than +23 °C, additional reinforcement of the tank walls must be ensured.
The tank material retains its operational properties in a wide range of ambient temperatures - from -50 °C to +60 °C. This allows the tank to be used not only indoors, but also outdoors.
Installation: the tank is intended for placement on a surface base. Burying the tank in the ground is not allowed.
PROFESSIONAL ECOSOFT МО6500 4″
4,950.00 €
Z-CIPSEP4 Ecosoft CIP unit for 2.5″, 4″ membranes systems
CIP (clean-in-place) procedure restores flux and rate of water purification of used reverse osmosis membranes. During operation, RO membranes are clogged with mineral (scaling), organic (fouling) and microbial (biofilm) deposits.
KEY FEATURES:
- Multi application system for chemical cleaning, winterizing, and preservative treatment;
- Heavy duty;
- Effective membrane recovery;
- High flow pump for better entrainment of soilants.








Reviews
There are no reviews yet.