FU1035CABCIDOW Ecosoft water softener filter
Ecosoft FU1035CABDOW The filter is designed to soften water. The filter has a compact design (one housing without a separate tank) and is ideal for installation in apartments and houses with 2-3 bathrooms. There will be enough water for the daily household needs of a family of 4-5 people.
Model features:
Ecosoft FU
a complex filter replaces the installation of several specialized filters. This reduces water treatment costs and saves space in the house. The filter works automatically and its maintenance consists only of timely filling of salt tablets.
All filter components are located in one unit, consisting of a housing and a control valve. The elements of the drainage and distribution system are closed with a convenient lid. Inside the case there is a container with filter material, as well as a place for storing salt and preparing a saline solution. At the top of the filter there is a control controller – an electromechanical valve with an LCD display.
Comprehensive water purification technology in one device is possible thanks to the use of DOWEX ion exchange resin.
During the filtration process, water passes through a layer of filter material. Ion exchange resins trap dirt particles, which are removed during regeneration. The filter operation is fully automated and does not require user attention.
The FU0835CABCIDOW filter contains DOWEX HCR material inside.
How the filter works
The filter is connected to the cold water supply pipe. It effectively purifies water and independently controls all work processes.
Water, previously purified from mechanical impurities, enters the filter housing, which contains DOWEX HCR filter material. Purified water is supplied to the consumer through the central pipe of the housing.
When the resource of the filter material is exhausted, the filter performs regeneration at a minimum water flow to ensure constant access to purified water. In addition, the control valve remembers the amount of water used at different times and adjusts to ensure sufficient clean water even during peak usage times, such as weekends.
Regeneration in 5 stages:
- Backwashing with water. Iron and manganese compounds are washed out of the filter material.
- The saline solution is supplied from the tank to the filter housing, passes through Dauex and washes out hardness salts from it. Contaminants along with the remaining solution are discharged into the sewer.
- Short backwash. Releases the material and washes away any remaining solution.
- Flushing DOWEX with a direct stream of water so that the layers of material are distributed in the correct sequence.
- Filling the salt reservoir with water to dissolve the tableted salt and prepare the solution for further regeneration.The system can then be used to purify water.
Service:
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task for the user is adding salt in a timely manner. This guarantees effective regeneration of the filter material, consistently high resource and water quality. If problems occur, the valve will inform you with a message on the display.
Technical specifications:
Performance
work/maximum, m 3 /h 2
Volume of filter material, l 25
Resource, m 3 (at a hardness of 5 mEq/l) 5
Salt consumption for regeneration, kg 2.5…3.5
Water consumption for regeneration (flow volume), m 3 0.25
Regeneration duration, min 80…110
Pressure drop in operating mode, bar 0.5
Working pressure, bar 2…6
Power supply 230 V, 50 Hz
Power consumption, W 30
Pipe connection diameter 1 inch or 3/4 inch.
Weight, kg 35
Overall dimensions of the filter, mm 110 x 35 x 47
Water requirements:
| Hardness, mEq/l | 15.0 |
| Iron content, mg/l | 0.2 |
| Manganese content: mg/l | 0.05 |
| Permanganate oxidation, mg O 2 /l | 5.0 |
| Ammonium, mg/l | |
| Required degree of purification from mechanical impurities, microns | 100 |
| Inlet water temperature, °C | +4…+30 |
| Full set: |
|
Reviews
There are no reviews yet.