The compact water softener filter Ecosoft FU0835CABCI is designed to reduce the hardness of domestic water. The system consists of two main components – a module (cylinder with a control valve) and a salt tank.
WHAT IS HARD WATER?
Scale on the heating elements of household appliances, white deposits on tiles and plumbing, stains on glass surfaces – all this is hard water.
In addition to the negative impact on the condition of household appliances, the high content of hardness ions also affects human health. This problem is characteristic of both water from natural sources and water supplied from the city water supply. The reasons for this may be hard source water, shortcomings in centralized treatment technologies, as well as the use of outdated technologies.
AN EFFECTIVE SOLUTION FOR HARD WATER
To reduce the hardness of domestic water, softeners, such as Ecosoft FU0835CABCI, are used. HCR-S/S ion exchange resin (Dow, Dowex™ or PURE PC002 cation exchange resin) is used as the filter material. During the filtration process, an ion exchange reaction occurs, as a result of which hardness salt ions are replaced with safe sodium ions, normalizing the water hardness level.
The filter softener reduces energy consumption, increases the efficiency of household appliances and reduces the frequency of breakdowns, significantly reducing repair costs.
WHAT ARE THE FEATURES OF THE FILTER?
Economical salt tablet intake
The filter is fully automated, quiet
Attractive and compact design
Reliable and efficient operation of the filter material for at least 5 years (subject to proper operation)
FILTER DEVICE
cylinder (column) with filter load
tank for storing salt tablets and preparing a solution for regeneration of the filter material
control valve (installed at the top of the column)
The filter housing is made of composite polymer material that is not subject to corrosion.
WHO IS IT BEST SUITABLE FOR?
The Ecosoft FU0835CABCI filter is designed for apartments with 2 bathrooms. The installation is designed to soften domestic water.
The system is designed for daily water preparation for 2-4 people. After softening, the water can be further purified to drinking quality using a reverse osmosis system.
How does the compact water softener filter Ecosoft FU0835CABCI work
The water softener works offline. The system effectively softens water and independently controls all the processes of its work. If the system resource is exhausted, it will independently go into regeneration, but only at a time when water consumption is minimal, so as not to deprive you of access to purified water. In addition, the softener remembers the intensity of your water consumption at different times and adjusts so that clean water is available even during its peak consumption – for example, on holidays.
The filter is connected to the cold water supply. Water, previously purified from mechanical impurities, enters the filter housing filled with ion-exchange resins. Water passes through the resin layer, but hardness salts remain on the resin. Purified water is supplied to the consumer through the central pipe of the housing.
When the resin resource is exhausted, when they are no longer able to absorb hardness ions, the control valve switches the filter to regeneration mode.
REGENERATION
Regeneration takes place in 4 stages, which are clearly programmed and are carried out by the valve itself.
The first stage – the filter is washed with a reverse flow of water, which allows you to swell the filter material and wash out mechanical impurities from it.
Then, a saline solution is supplied from the tank to the filter housing, it passes through the resin, as a result of which hardness salts are washed out of it and, together with the remaining solution, are discharged into the sewer.
At the end of regeneration, the resin is rinsed with a direct stream of water (stage 3) to wash out the remaining saline solution.
The last stage (4) is filling the brine tank with water to dissolve the tableted salt and prepare the solution for the next regeneration. After that, the system can be used for water purification again.
Service
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task for the customer during maintenance is to fill the salt in time. This guarantees effective regeneration of the filter material, a consistently high service life and water quality.
In case of other problems, the valve will inform you with a text message on the display.
Productivity working/maximum, m3/h: 1.2/1.8
Cation exchange volume, l: 18
Resource, m3 (at hardness 5 meq/l): 3.6
Salt consumption for regeneration, kg: 1.8 – 2.8
Water consumption for regeneration (wastewater volume), m3: 0.15
Regeneration duration, min: 80 – 110
Pressure drop in operating mode, bar: 0.5…1.0
Working pressure, bar: 2.0 – 6.0
Electrical requirements: 230 V, 50 Hz
Power consumption, W: 30
Net weight, kg: 40
Pipe connection diameter: 1″ or 3/4″
Overall dimensions of the filter, (LxWxH), cm: 35 х 52 х 113
Reviews
There are no reviews yet.