APRO-I-500-T410 Aquaphor ready-made compact solution based on a reverse osmosis system

APRO-I-500-T410 is a ready-to-use, compact solution based on the APRO-I-500 reverse osmosis system,
for use in various applications.
This design includes the minimum necessary components to provide consumers with crystal clear water. Its compact size allows APRO-I-500-T410 to be installed in small spaces, while its functions provide the consumer with a wide range of functions, including post-mineralization, allowing you to choose a comfortable level of water hardness with additional UV bactericidal treatment.
The system is fully automatic, including circulation in a clean water tank,
as well as supplying water to the consumer in a wide range of flow rates.
The frame material is polymer-coated steel with plastic panels.
APRO systems are the most effective and safest method for removing dissolved salts, including hardness salts.

Specifications
Working temperature – °C 5–40
Voltage – 220 V
Minimum working pressure, MPa – 0.7
Maximum working pressure, MPa – 1
Design – Standard
Inlet / Outlet – 1″/½”
Dosing pump – No
Connection size, inches (DN) – 1 (DN25)
Weight – 202 kg
Brand – Aquaphor
Working pressure, MPa – 0.7–1.0
Filtration type – Reverse osmosis
Flow rate, m3/hour – 0.5
Model – APRO-I-500-T410
Maximum pressure, atm – 10
Country of manufacture – Estonia
Flow rate, l/hour – 500
Clean water tank capacity, l – 80
With mineralizer – Yes
With pump – Yes
Power consumption, W – 550
Storage tank – Yes
Number of membranes – 2
Flushing – Yes
Pumped liquid temperature, °C – 5–45
Dimensions (H x W x D), mm – 1610 × 600 × 800
PMO, up to, mg/L – 10
Maximum free chlorine concentration, mg/L – 0.1
Flushing pH range – 3–12
Working pH range – 3–11
Backwash function – No
Number of membranes in the housing – 1
Prefiltration – 1 × Viking
Filtration degree – 0.001 µm
Automatic control device – 0
Selectivity, % – 95
Limestone protection – No
Circulation line – Yes
Mixing line – No
RO controller – Yes
Built-in TDS monitor – Yes
Module type – K3, K2, K7B – Drain – ½”
Membrane flushing – Yes
Circulation pump – Yes
First portion discharge – No
Replaceable element – 1 × B520 Pro (Pro AS)
Feed water TDS, mg/L – 2000
Hydraulic efficiency, % – 99
Drain return function – Yes
Flow meter type – Pulse sensors
Pressure meter type – Pressure meters at the inlet and downstream of the high-pressure pump
Flow control method – Automatic
Inhibitor dispenser – No
Inhibitor level monitor – No
Permeate refill – Yes
Water supply station – Yes
Treated water conductivity, µS/cm – 1–200
CIP ready – No
Pressure meter type – Directional
Max. particle size, mm – 0.0001
Working pressure, bar – 7–10
Membrane Type – 4040
Chemical Flushing – No
Connection Type – NPTF
Turbidity, mg/L – 1.0
Water Sterilizer Type – UV Sterilizer