The mechanical cleaning flask Ecosoft BB10 is designed for the purification of cold water for domestic purposes. The impurities that the filter can remove depend on the cartridge installed. The filter body is made of high-quality polypropylene, which has increased durability.
Uses standard size 4.5″ × 10″ cartridges.
With the Ecosoft BB10 filter, you can use a cartridge that will help you deal with contaminants that are specific to your water.
MAIN ADVANTAGES
- High water purification efficiency
- Reliable and quality components
- High performance
- Compact and easy to install
WHAT IS THE FILTER SUITABLE FOR?
The filter is installed in a house or apartment with 1-2 bathrooms. Purified water is enough for 5 people.
WHAT CHANGES WILL HAPPEN AFTER PURCHASING THE FILTER?
- You will enjoy showering or bathing in clean water
- You will not need to spend a lot of effort on cleaning the plumbing
- Your appliances and plumbing will last longer
The filter set includes:
- Flask
- bracket
- Service key
- screws
- Passport
The Ecosoft mechanical cleaning flask must be installed by a qualified technician.
The filter is connected to the water supply using metal plastic pipes. You may need accessories or adapters (not included with the filter).
The filter is a housing (flask) in which a cartridge is inserted (not included in the delivery set).
During the filtration process, water is supplied to the cartridge, which removes contaminants. As a result, you will get clean water.
Service
The Ecosoft BB10 mechanical filter is intended for cold water treatment only.
To ensure constant access to clean water, we recommend replacing the cartridges every 2-6 months.
The service life of the cartridge depends on the degree of contamination and the amount of filtered water.
After the end of the resource and service life, the cartridge must be replaced with a new one. To do this, unscrew the flask using the special key that is included in the package. Then remove the old cartridge, rinse the filter flask under running water and insert a new cartridge. Screw the housing with the cartridge to the filter cover until it stops.
ATTENTION! CARTRIDGES NOT INCLUDED!
| Sizes: | 1481×289×364 mm |
| Throughput volume*: | 500 L/h |
| Permeate recovery**: | 75 % |
| Maximum TDS: | 3000 mg/l |
| Inflow request: | 650 – 800 l/h |
| Operating pressure: | 8 – 12 bar |
| Maximum pressure: | 14 bar |
| Electrical requirements: | 230 V, 50 Hz |
| Electric power: | 0.7 kW |
| Rating of prefilters: | 5 μm |
* depends on feedwater TDS, temperature and permeability recovery
** for low flocculation/water pollution
Incoming water, requirements:
| Inlet water temperature: | +5 – +40 °С |
| Chlorine balance, max.: | 0,1 mg/l |
| Hardness: | up to 3 meq/l (150 mg/l CaCO₃) |
| Iron: | up to 0,1 mg/l |
| Manganese: | up to 0,05 mg/l |
| Silicate: | up to 20 mg/l |
| Chemical oxygen consumption, max.: | 4,0 mg О₂/L |
| Hydrogen sulfide: | no |
| Limits may be exceeded if antiscalants, oxygen scavengers, or other RO chemical pretreatments are used. |
Reviews
There are no reviews yet.