A-S550 Aquaphor water softening and iron removal filter

Extremely compact, versatile, economical and reliable 2-in-1 water filtration system for softening and iron removal. Designed to remove iron (concentration up to 10 mg/l), hardness salts and pre-filter particles up to 20 µm in diameter.

The unique tank design and the smallest ion exchange resin granules in the filling allow the system to operate quietly, quickly and very economically. The consumption of salt and water for regeneration is significantly lower than in classic column-type water softeners. The filling itself does not need to be changed often, and it lasts 10 times longer than in conventional columns.

All this makes the performance characteristics of the AQUAPHOR S550 the most attractive among similar systems on the market, and the total operating costs are very favorable.

Specifications:

Maximum capacity, g 1100

Maximum compensated hardness, mg/l 1200

Maximum dissolved iron and manganese concentration, mg/l* 10

Minimum pH 6

Water and ambient temperature, °C +5…+38

Water pressure, MPa 0.14–0.7

Minimum water flow for rinsing, l/min** 7.6

Maximum flow for draining during regeneration, l/min 9.1

Nominal/maximum flow, l/min 23 / 35

Pressure loss at flow rate 22.7 l/min (6 gallons per minute), MPa*** 0.1

HE mode capacity, kg salt/gram hardness 0.8 / 465

HC mode capacity, kg salt/gram hardness 2.1 / 903

AU maximum capacity, kg salt/gram hardness 3.3 / 1100

Regeneration method Intelligent, water meter

Power specifications 12 V AC; 50/60 Hz;

0.015 kW h

Connection port (NPT) 1″ (MNPT)

Minimum drain diameter, mm (inch) 16 (5/8)

Filtration tank size (ID × H), mm 267 × 277

Height, cm 55.4

Base, cm 32.2 × 43.2

Gross weight, kg 35

Filtration media and its quantity

Extra fine monodisperse ion exchange resin, l 15

Quartzite, kg 0.8