Description:
CENTAVR® The mechanical filter is designed to effectively remove mechanical impurities (sludge, sand, rust, scale).
MODEL FEATURES
CENTAVR® The filter uses high-quality sorption material Filter-Ag (Clack Corporation, USA). ®
The filter is also used as the first stage of water purification before filter softening, complex cleaning, and removal of chlorine and hydrogen sulfide to ensure their normal and efficient operation.
WHAT ARE THE BENEFITS?
- There is no dirt or sand on the surface of the bathtub and in the sink.
- Full filter automation
- Reliable and efficient operation up to 5 years*
- Increasing the service life of household appliances, plumbing and heating systems.
- Quality guarantee (confirmation by international certificates CE and ISO)
*With proper operation and timely replacement of filter material
FILTER DESIGN AND OPERATING CHARACTERISTICS
The system consists of a corrosion-resistant housing filled with high-quality sorption material Filter-Ag and a control valve. At the top of the cylinder there is a valve with elements of the drainage and distribution system. ®
Water enters the filter housing and passes through a layer of filter material, which effectively retains mechanical impurities. Purified water is delivered to the consumer through the central tube of the housing.
The installation is connected to the cold water pipeline, sewerage and electricity.
REGENERATION
After the resource of the filter material is exhausted, the filter automatically switches to regeneration mode. A reverse flow of water is passed through the layer of material at high speed, washing away all contaminants from the surface of the coal and drying it. The filter is then used again to purify the water.
WHO IS THIS BEST FOR?
The filter capacity is up to 1.2 m3 per hour, which allows you to provide clean water to a home inhabited by up to 5 people. The device is suitable for purifying artesian and tap water.
Once cleaned, it can be used directly in washing machines, dishwashers, hand washing, home cleaning and water purification.
| Labor productivity, m3/year | 1,55 |
| Volume of filter-Ag filter material, l ® | 84,9 |
| Water consumption for regeneration, m3/year | 2,4 |
| Regeneration duration, min | 15… 30 |
| Amount of water for regeneration, m3 | 0,6… 1,1 |
| Required level of preliminary water purification from mechanical impurities | 100 μm |
| Working pressure, bar | 2… 6 |
| Pressure drop in operating mode, bar | 0,5… 1,0 |
| Water temperature at the source, °C | +4…+30 |
| Control valve power supply and power consumption | 230 V, 50 Hz, до 30 W |
| Mounting connection (male thread) | 1” |
| Net weight, kg | 70 |
| Overall filter dimensions (H x D), cm | 186 x 37 |
*depends on feedwater TDS, temperature and permeability recovery
** for low flocculation/water contamination
Incoming water, requirements:
| Water temperature at the inlet: | +5 – +40 °С |
| Chlorine balance, no pain: | 0,1 mg/l |
| Hardness: | līdz 3 meq/l (150 mg/l CaCO₃) |
| Iron: | līdz 0,1 mg/l |
| Manganese: | līdz 0,05 mg/l |
| Silicate: | līdz 20 mg/l |
| Chemical flow of oxygen, no pain: | 4,0 mg О₂/L |
| Hydrogen sulfide: | no |
| Предельные значения могут быть превышены при использовании средств против накипи, поглотителей кислорода или других химических средств предварительной очистки обратным осмосом. |
Reviews
There are no reviews yet.