Product information
Description:
The Ecosoft FP 1665 CT filter is designed to effectively remove mechanical impurities (sludge, sand, rust, scale).
WHAT ARE THE FEATURES OF THE MODEL?
CENTAVR® high-quality Filter-Ag sorption material (Clack Corporation, USA) is used. ®
The filter is also used as the first stage of water purification before softening the filters, complex purification, chlorine and hydrogen sulfide removal to ensure their normal and efficient operation.
WHAT ARE THE BENEFITS?
No deposits or sand on the surface of the bath and in the sink
Fully automated filter operation
Reliable and efficient operation for at least 5 years*
Longer service life of appliances, plumbing and heating systems
Quality assurance (confirmed by international CE and ISO certificates)
*Subject to correct operation and timely replacement of filter media
FILTER DESIGN AND OPERATION
The system consists of a corrosion-resistant housing filled with high-quality Filter-Ag sorption material and a control valve. In the upper part of the cylinder there is a valve with drainage and distribution system elements. ®
Water enters the filter housing, passes through a layer of filter material that effectively retains mechanical impurities. Purified water is supplied to the consumer through the central pipe of the housing.
The unit is connected to cold water, sewage and electricity supply lines.
REGENERATIONS
When the filter’s media resource is exhausted, the filter itself switches to regeneration mode. The reversed water flow is passed through the material layer at high speed, washing all impurities from the surface of the coal and is discharged into the sewer. The filter is then used again to purify the water.
WHO IS IT BETTER FOR?
Ecosoft FP 1665 CT has a capacity of up to 1.56 m3 per hour, which allows you to provide a cottage with clean clean water for up to 8 people. The plant is suitable for the treatment of artesian and tap water.
After cleaning, it can be safely used in washing machines, dishwashers, hand washing, house cleaning and water treatments.
| Drinking water filters | 2,05 |
| Filter material volume Filter-Ag, l ® | 113,2 |
| Water consumption for regeneration, m3/hour | 3,12 |
| Regeneration duration, min | 15… 30 |
| Amount of water per regeneration, m3 | 0,8… 1,5 |
| The required level of pretreatment of water from mechanical impurities | 100 μm |
| Working pressure, bar | 2… 6 |
| Differential pressure in working mode, bar | 0,5… 1,0 |
| Water temperature in the source, °C | +4…+30 |
| Control valve power supply and power consumption | 230 V, 50 Hz, līdz 30 W |
| Unit connection (male thread) | 1” |
| Net weight, kg | 100 |
| Total dimensions of the filter (H x D), cm | 186 x 42 |
* depends on feedwater TDS, temperature and permeability recovery
** for low flocculation/water pollution
Ienākošais ūdens, prasības:
| Inlet water temperature: | +5 – +40 °С |
| Chlorine balance, max.: | 0,1 mg/l |
| Hardness: | līdz 3 meq/l (150 mg/l CaCO₃) |
| Iron: | līdz 0,1 mg/l |
| Manganese: | līdz 0,05 mg/l |
| Silicate: | līdz 20 mg/l |
| Chemical oxygen consumption, max.: | 4,0 mg О₂/L |
| Hydrogen sulfide: | are not |
| Limits may be exceeded if antiscalants, oxygen scavengers, or other RO chemical pretreatments are used. |
Reviews
There are no reviews yet.