RF2162CE125 FILTER FOR REMOVING IRON AND WATER SOFTENER ECOSOFT
What are the features of the model?
An iron removal filter and water softener can save you a lot of money on the purchase and maintenance of a home water purification system. One Ecosoft FK 2162 CE filter replaces several specialized units. The system works automatically, and its maintenance is reduced only to the timely addition of salt tablets.
Prevents the appearance of a yellow tint in water;
Reliable and efficient operation of the filter material for at least 5 years (if performed correctly);
Economical salt consumption and low wastewater discharge.
Filter design and operation
RF2162CE125 Ecosoft – The system consists of two main modules – a cylinder with filter material and a tank for dissolving salt. The cylinder (column) is made of corrosion-resistant polymer composite material. Inside there are 150 liters of Ecomix filter mixture, consisting of several components.
Each component of the filter material is designed to neutralize or retain certain types of harmful impurities. As a result, complex water filtration is performed in one step. Purified water has good organoleptic properties and can be used for any household purposes. It is completely safe for skin and hair, and does not form scale on the heating elements of devices.
Who is it best for?
The comprehensive cleaning system Ecosoft FK 2162 CE is optimally suited for water purification in a cottage, country house or small hotel. Filter capacity from 7.7 m3 per hour. The device can be used to purify and soften artesian and tap water.
HOW THE IRON REMOVAL FILTER AND WATER SOFTENER WORK
The filter is connected to a cold water supply, effectively purifies the water and independently controls all processes of its operation.
Water, previously purified from mechanical impurities, enters the filter housing filled with Ecomix A filter material. The material consists of five components that successively retain iron, manganese, organic impurities and hardness salts. Purified water is supplied to the consumer through the central pipe of the housing.
When the resource of the filter material is exhausted, the filter automatically switches to regeneration, but only at the moment when water consumption is minimal, so as not to deny you access to purified water. In addition, the control valve remembers how much water is used at different times and automatically adjusts itself so that clean water is available even during peak periods such as weekends.
Regeneration takes place in 5 stages:
Backwashing with water. At the same time, iron and manganese compounds are washed out of the filter material.
The saline solution is supplied from the tank to the filter housing, passes through Ecomix® and washes out hardness salts and organic matter. Impurities along with the remaining solution are discharged into the sewer.
Short backwash. Release the load again and flush out the remaining saline solution.
Rinsing Ecomix® with a direct stream of water to lay down layers of material in the correct order.
Filling the salt tank with water to dissolve the salt tablets and prepare the solution for the next regeneration.
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task for the customer during maintenance is timely filling of salt. This guarantees effective regeneration of the filter material, consistently high service life and water quality.
Filter for iron removal and water softening ECOSOFT RF2162CE125 included:
CE Control Valve 1.25″ 1
Pressure tank 21×62, 4″ 2
Brine tank 3
1.25″ CE Valve Kit (V125CEDME):
CE Control Valve 1.25″
Top divider, 14 segments
1.25″ connection kit
Injector, DLFC – for Ecomix and cation exchange resins
Valve instruction manual
Pressure tank kit
Pressure tank 21×62.4″
4″ – 2.5″ adapter
Riser DN 32 mm
Bottom divider, 15 segments
Salt tank 24×50, 378 l
– Service (pressure drop 1 bar) – 7.7 m3/h
– Backwash (pressure drop 1.7 bar) – 7.3 m3/h.
Inlet, outlet – G 1.25″
Drain – G 1″
Brine line – G 3/8″
Working pressure – 2-6 bar.
Operating temperature +4…+30 оС
Electrical requirements – 230 V, 50 Hz
Power – 30 W
Hydraulic tank volume – 311 l.
Brine volume – 378 l.
The volume of the rounded side is 25 l.
Dry system weight – 45 kg.
*Only Clack WS1.25 CE control valves include flow meter, bypass and 1.25″ mounting kit.
RECOMMENDED FORM VOLUME
C type Filter material Ecomix – 150 l ***
A type Filter material Ecomix – 150 l ***
P type Filter material Ecomix – 150 l ***
HCRS-S Strong acid cation exchanger – 200…225 l
PC002 Strong acid cation exchanger – 200…225 l
The volume of filter material depends on its properties. TDS for filter media can be found on the official website www.ecosoft.com.
*** The volume of Ecomix can be increased by no more than 25 liters.