V125CIDMK-08 Water Specialist 1.25” CI Control Valve
455.00 €
The automatic control valve is the central part of the water treatment plant. It provides full automation of the water preparation and filter material regeneration, controlling the water flow according to the current stage of the work cycle.
KEY FEATURES:
- Solid state microprocessor with easy access front panel settings;
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential;
- Program in ppm, French degrees, German degrees, or cubic meters;
- Fully programmable regeneration cycle sequence (maximum 9);
- Programmable regeneration cycle times;
- Days override feature; 1 – 28 days available;
- Backwash and brining ability to 21″ diameter tanks;
- Downflow/upflow regeneration;
- Stores system configuration and operation data in nonvolatile memory;
- Coin Cell Lithium battery back-up with a 24 hour carry over;
- Level VI 15-volt output DC power supply provides safe and easy installation;
- Control valve design provides optimum service and backwash rates;
- Pre or Post treated water regenerant refill;
- Mixing valve option available;
- Low salt alarm;
- 24-hour clock;
- Reliable and proven DC drive.
Description
V125CIDMK-08 Water Specialist 1.25” CI Control Valve
Technical specifications:
| Flow rates: | Service, 15 psi/1 bar drop: 129 lpm (7.7 m3/h) (34 gpm) Backwash, 25 psi/1.7 bar drop: 121 lpm (7.3 m3/h) (32 gpm) (1) |
| Operating pressures: | Minimum/Maximum: 20 – 125 psi (1.4 – 8.6 bar) |
| Operating temperatures: | Minimum/Maximum: 40º – 110º F (4º – 43º C) |
| Meter: | Accuracy: ± 5% Flow Rate Range: 0.95 – 129 lpm Volume Range: 0.02 – 5,700 m3 Totalizer: 1 m3 – 99,999 m3 |
| Dimensions & weight: | Distributor Pilot: 1.32″ OD Pipe (1″ NPS) or 32 mm OD Drain Line: ¾” or 1″ NPT Brine Line: 3/8″ or ½” OD Poly Tube Mounting Base: 2 ½”- 8 NPSM Height From Top Of Tank: 7 3/8″ (187 mm) Weight: 4.5 lbs (2 kg) |
| Electrical specifications: |
Supply Voltage: 200VAC to 240VAC Supply Frequency: 50/60 Hz Output Voltage: 15VDC Output Current: 500 mA |
| Tank applications: | Water Softener: 6″ – 21″ Diameter Water Filter (2): 6″ – 24″ Diameter |
| Cycles of operation: | Backwash: 1 – 120 minutes Rinse: 1 – 120 minutes Pause (service): 1 – 480 minutes Brine (co-current): 1 – 180 minutes Brine (counter-current): 1 – 180 minutes Refill (softener): 0.05 – 90.00 Kg Refill (filter): 0.2 – 76.00 Liters |
| Compatible with: | Sodium chloride, potassiumchloride, potassium permanganate, sodium bisulfite, chlorine and chloramines. |
(1) Acquired by use of external drain line flow control.
(2) Filter tank size calculated 10 gpm of backwash per square foot of bed area / 407 lpm per square meter of bed area.
Reviews (0)
You must be logged in to post a review.
Related products
Cabinet Eurotrol NEW Crystal MAXI + 1035
In order to preserve the interior and save the free space in the room, a cabinet-type tank is used, in which the filter housing of a certain size is placed, while the rest of the space is used for the preparation and storage of the salt solution.
The cabinet-type tank 10*35 Maxi Crystal is made of environmentally friendly, high-strength plastic, which has a long service life and the tank harmoniously fits into the surrounding environment.
Materials: container and salt cover made of HDPE, cover made of polystyrene
Size (Width x Length x Height) - 320x500x1140mm
Brine well MAXI (diameter, height) - 100mm, 820mm
Canature Pressure Tank 1044, Top Thread 2 ½”
Canature filter pressure tanks are used in several water treatment and water treatment applications such as domestic, industrial and agricultural.
Features
- Polyethylene (PE) seamless one-piece tank shell
- Coating - continuous fiberglass strands with high strength epoxy resin
Pressure vessel size: 10" diameter x 44" length
Volume: 48.8 L
Weight: 6.19 kg
Dimensions: 1121mm x 268mm
Maximum pressure: 10 bar (150 psi)
Maximum temperature: 49'C
Canature Pressure Tank 1248, Top Thread 2 ½”
Canature filter pressure tanks are used in several water treatment and water treatment applications such as domestic, industrial and agricultural.
Features
- Polyethylene (PE) seamless one-piece tank shell
- Coating - continuous fiberglass strands with high strength epoxy resin
Pressure vessel size: 12" diameter x 48" length
Volume: 78.5 L
Weight: 8.05 kg
Dimensions: 1233mm x 315mm
Maximum pressure: 10 bar (150 psi)
Maximum temperature: 49'C
Canature pressure tank 1252, top thread 2 ½”
Canature filter pressure tanks are used in several water treatment and water treatment applications such as domestic, industrial and agricultural.
Features
- Polyethylene (PE) seamless one-piece tank shell
- Coating - continuous fiberglass strands with high strength epoxy resin
Pressure vessel size: 12" diameter x 52" length
Volume: 84.7 L
Weight: 8.63 kg
Dimensions: 1338mm x 315mm
Maximum pressure: 10 bar (150 psi)
Maximum temperature: 49'C
Canature pressure tank 4272, top thread 6”
Price on request
Canature filter pressure tanks are used in several water treatment and water treatment applications such as domestic, industrial and agricultural.
Features
- Polyethylene (PE) seamless one-piece tank shell
- Coating - continuous fiberglass strands with high strength epoxy resin
Pressure vessel size: 42" diameter x 72" length
Volume: 1530 L
Dimensions: 2395mm x 1090mm
Maximum pressure: 10 bar (150 psi)
Maximum temperature: 49'C
-14%
Canature pressure vessel 1054, top thread 2 ½”
Canature filter pressure tanks are used in several water treatment and water treatment applications such as domestic, industrial and agricultural.
Features
- Polyethylene (PE) seamless one-piece tank shell
- Coating - continuous fiberglass strands with high strength epoxy resin
Pressure vessel size: 10" diameter x 54" length
Volume: 61.0 L
Weight: 7.69 kg
Dimensions: 1381mm x 268mm
Maximum pressure: 10 bar (150 psi)
Maximum temperature: 49'C
Reviews
There are no reviews yet.