Description:
Ecosoft FP 1354 CT The reverse osmosis filter is designed to effectively remove mechanical impurities (sludge, sand, rust, scale).
MODEL FEATURES
CENTAVR® The filter uses high-quality sorption material Filter-Ag (Clack Corporation, USA). ®
Ecosoft FP 1354 CT is also used as the first stage of water purification before filter softening, complex cleaning, and removal of chlorine and hydrogen sulfide to ensure their normal and efficient operation.
WHAT ARE THE BENEFITS?
- There is no dirt or sand on the surface of the bathtub and in the sink.
- Fully automatic filter
- Reliable and efficient operation up to 5 years*
- Enlargement of the page for the service of household appliances, plumbing and heating systems.
- Quality guarantee (confirmed by international CE and ISO certificates)
*With proper operation and timely replacement of filter material
FILTER DESIGN AND OPERATING CHARACTERISTICS
The system consists of a corrosion-resistant housing filled with high-quality sorption material Filter-Ag and a control valve. At the top of the cylinder there is a valve with elements of the drainage and distribution system. ®
Water enters the filter housing and passes through a layer of filter material, which effectively retains mechanical impurities. Purified water is delivered to the consumer through the central tube of the housing.
The installation is connected to the cold water pipeline, sewerage and electricity.
REGENERATION
After the resource of the filter material is exhausted, the filter automatically switches to regeneration mode. A reverse flow of water is passed through the layer of material at high speed, washing away all contaminants from the surface of the coal and drying it. The filter is then used again to purify the water.
WHO IS THIS BEST FOR?
Ecosoft FP 1354 CT filter capacity is up to 1.03 m3 per hour, which allows you to provide clean clean water to a house inhabited by up to 4 people. The device is suitable for purifying artesian and tap water.
Once cleaned, it can be used directly in washing machines, dishwashers, hand washing, home cleaning and water purification.
[/vc_column_text]
TECHNICAL SPECIFICATIONS
| Labor productivity, m3/year | 1,35 |
| Filter-Ag volume filter material, l ® | 56,6 |
| Water consumption for regeneration, m3/year | 2,06 |
| Regeneration duration, min | 15… 30 |
| Amount of water for regeneration, m3 requirement: | 0,5… 1,0 |
| Required level of primary purification from mechanical impurities | 100 μm |
| Working pressure, bar | 2… 6 |
| Electrical Requirements: | 0,5… 1,0 |
| Water temperature at the source, °C | +4…+30 |
| Control valve power supply and power consumption | 230 V, 50 Hz, līdz 30 W |
| Mounting connection (male thread) | 1” |
| Net weight, kg | 70 |
| Overall filter dimensions (H x D), cm | 159 x 34 |
*depends on feedwater TDS, temperature and permeability recovery
** for low flocculation/water contamination
Incoming water, requirements:
| Inlet water temperature: | +5 – +40 °С |
| Chlorine balance, no more: | 0,1 mg/l |
| Hardness: | līdz 3 meq/l (150 mg/l CaCO₃) |
| Iron: | līdz 0,1 mg/l |
| Manganese: | līdz 0,05 mg/l |
| Silicate: | līdz 20 mg/l |
| Chemical oxygen consumption, no more: | 4,0 mg О₂/L |
| Hydrogen sulfide: | no |
| Limits may be exceeded when using antiscalants, oxygen scavengers, or other reverse osmosis pre-treatment chemicals. |
Reviews
There are no reviews yet.