Control valve power supply and power consumption 230 V, 50 Hz, up to 30 W
| Operating capacity, m3/hour | 1,15 |
| Filter material volume Filter-Ag, l ® | 56,6 |
| Water consumption for regeneration, m3/hour | 1,73 |
| Regeneration duration, min | 15… 30 |
| Amount of water per regeneration, m3 | 0,4… 0,8 |
| The required level of pretreatment of water from mechanical impurities | 100 μm |
| Working pressure, bar | 2… 6 |
| Differential pressure in working mode, bar | 0,5… 1,0 |
| Water temperature in the source, °C | +4…+30 |
| Control valve power supply and power consumption | 230 V, 50 Hz, līdz 30 W |
| Unit connection (male thread) | 1” |
| Net weight, kg | 50 |
| Filtra kopējie izmēri (H x D), cm | 152 x 31 |
* depends on feedwater TDS, temperature and permeability recovery
** for low flocculation/water pollution
Incoming water, requirements:
| Inlet water temperature: | +5 – +40 °С |
| Hlora atlikums, maks.: | 0,1 mg/l |
| Hardness: | līdz 3 meq/l (150 mg/l CaCO₃) |
| Iron: | līdz 0,1 mg/l |
| Mangāns: | līdz 0,05 mg/l |
| Silicate: | līdz 20 mg/l |
| Chemical oxygen consumption, max.: | 4,0 mg О₂/L |
| Hydrogen sulfide: | are not |
| Limits may be exceeded if antiscalants, oxygen scavengers, or other RO chemical pretreatments are used. |
Reviews
There are no reviews yet.