HR-60 UV Ecosoft water sterilizer

HR-60 UV Ecosoft UV water sterilizer:

High UV radiation dose (30 mJ/cm2), sufficient to neutralize a wide spectrum of microorganisms

Physical disinfection method that does not require chemicals or produce toxic by-products

Housing made of AISI 304 stainless steel

The sleeve is made of high-purity quartz and is particularly resistant to the formation of sediment erosion

Long, effective service life – up to 9000 hours

Operation

Water passes through an ultraviolet lamp, where the disinfection process takes place.

Quartz coating is a necessary measure to prevent water from entering the emitter case.

UV disinfection unit maintenance

Replace the lamp once a year

Clean the components to remove mechanical impurities and deposits

Technical data

Maximum disinfected water flow: 0.23 m³/h

Type and number of emitters: 1 х T510

Maximum inlet pressure: 8 bar

Power supply: 230 V, 50 Hz

Power consumption of one emitter: 10 W

Pipe diameter: ¼” thread

Lamp damage control device: visual

Overall dimensions of the assembled unit (L x W x H): 270 × 52 × 90 mm

Approximate weight: 1.3 kg

Feed water requirements

Treated water temperature: +4…+30 °С

Turbidity: 0.58 mg/L

Total hardness: 125 ppm

Iron: 0.3 ppm

Manganese: 0.05 ppm

Hydrogen sulfide: 0.05 ppm

UV disinfection system kit

Stainless steel housing assembly

Quartz sleeve

UV emitter

Power supply (electronic control unit)