CROSS90 Ecosoft Balance direct flow RO system, MO3600MPECO

Product Information

The Ecosoft CROSS90 Balance direct flow reverse osmosis filter is a high-performance water purification system with built-in calcium mineralization that ensures both purity and great taste. With a flow rate of 1.5 l/min (90 l/h), it removes up to 99.8% of contaminants, including PFAS, chlorine, bacteria, heavy metals and limescale.

Its 5-stage purification system not only ensures safe and clean water, but also enriches it with essential calcium, making every glass healthier and more refreshing. With a recovery rate of up to 60%, the system maximizes efficiency and reduces wastewater.

The smart faucet, LED filter change indicator, leak protection and automatic flushing ensure consistent performance and water quality at all times. Compact and easy to install under the sink, the CROSS 90 Balance is ideal for families looking for clean, mineral-rich drinking water. Thanks to tool-free, quick and dry cartridge changes in less than 7 minutes, maintenance is simple, clean and hassle-free.

Specification:

Flow rate – 90 l/h
Recovery – 60%
TDS (purified water) – 5-15 ppm
Inlet water pressure – 2-5 bar
Total mineral content – 40-70 ppm
Electrical requirements – 230 V, 50 Hz

System components:

Filter housing
Replacement filter kit
Smart tap for purified water
3-pin connector
Drain saddle
Pipe package
Removable power supply
User manual
Source water requirements:
Specification
Total dissolved solids (TDS) ≤ 1500 mg/l
Hardness < 500 mg/l CaCO₃
Chlorine ≤ 0.5 mg/l
Total iron ≤ 0.3 mg/l
Manganese ≤ 0.1 mg/l
Chemical oxygen demand ≤ 5 mg/l O₂
Total microbial count (TMC) ≤ 50 CFU/100 ml
Coliform index ≤ 3

Maintenance and maintenance

To maintain optimal performance, the CROSS90 water filter requires periodic replacement of the filtration elements.

Cartridge replacement frequency
Ecosoft CF complex pre-filter for CROSS filters (CF): Replace every 12 months.
Ecosoft 600 GPD membrane element CROSS90 (RO): Replace every 24 months.
Ecosoft MCB activated carbon block and mineralizing post-filter CROSS90 Balance (MCB): Replace every 12 months.
Easy and dry cartridge replacement

Cartridge replacement is quick and easy, requiring only two simple steps. When you twist the cartridge to remove it, the inlet water flow is automatically shut off, ensuring a clean and dry replacement process. Thanks to this design, cartridge replacement takes less than 7 minutes and requires no tools.

The system is designed to be used with tap water that meets the recommended water supply requirements.

After replacement, press and hold the corresponding filter cartridge reset button for 5 seconds. You will hear one beep (1 second), the corresponding filter life indicator will flash purple twice and then turn solid blue.

A color-coded indicator on both the purified water tap and the filter front panel will alert you when it is time to replace the cartridges. In addition, an audible indication system provides additional warnings: one short beep signals that the filter capacity is nearing exhaustion, and two short beeps indicate that replacement is required.

FEATURES

1. Pure water yield >50% – Extreme water saving efficiency.
2. High performance and compact drinking water filter for your kitchen

EQUIPMENT

Filtration module
Replacement cartridge kit.
Smart edge for purified water
Inlet connection with water supply tap for connection to water supply
Drain clamp for connection to sewer
Pipe kit
External power supply
User manual