-25%
WCHV2010 Granular activated carbon post-filter with threaded connection 2″x10″
The post-carbon cartridge for reverse osmosis systems performs the final purification of water from chlorine and improves its organoleptic properties. It is a replaceable element installed as the last purification stage in reverse osmosis filters. Passing through the activated carbon, it loses unwanted odors and acquires a fresh taste.
Whole house filter Ecosoft AquaPoint Standard
Industrial systems Industrial main filters Household water filters Main water filters With a cartridge
- Clean water for daily household needs in a house or apartment
6 ready-made solutions for various water problems - Showering, bathing, washing will be a pleasure
The water after the filter is clear, does not smell of chlorine and hydrogen sulfide - Cleaning the house is easy
There will be no yellow streaks or plaque on the plumbing, tiles in the bathroom - Easy installation in 60 minutes
Compactly placed without repair damage, you can insert the filter or hang it on the wall - Thoughtful design
Allows to connect the mains from both sides of the filter
-15%
XLE-4040 Membrane elements FilmTec (DOW)
The XLE-4040 membrane element is designed for commercial use. It is suitable for the production of high purity water and improves the low cost of the water treatment system.
XLE-4040 Operates at the lowest pressure for reverse osmosis, which reduces energy costs.
MAIN ADVANTAGES
Global Water Treatment Standard - FILMTEC Membrane (USA)
High energy efficiency due to low working pressure
The element's large active surface area ensures higher productivity
Automated high precision manufacturing
-15%
XLE-440 Membrane element FilmTec (DOW)
The XLE-440 membrane element is designed for commercial use. It is suitable for the production of high purity water and improves the low cost of the water treatment system.
XLE-440 Operates at the lowest reverse osmosis pressure, reducing energy costs.
MAIN ADVANTAGES
Global Water Treatment Standard - FILMTEC Membrane (USA)
High energy efficiency due to low working pressure
The element's large active surface area ensures higher productivity
Automated high precision manufacturing
Z D1301 Riser pipe hold down CLAMP 1″
Water filter components CLACK control units and accessories ECOSOFT control units and accessories Items
Working pressure: 20 - 125 psi 1.4 - 8.6 bar
Temperature ranges: 40 - 110°F 4 - 43°C
Install on cold water supplies only
This clamp will hold the distributor tube in the correct position in the mineral tank and prevent the lower distributor from lifting up when the control valve is removed for service. The clamp holds the riser tube in the center of the tank for proper connection to the control valve. It is designed to allow the upper baskets of the divider to be used as well. The riser holding clamp also spreads the water over the material bed for better spreading and less chance of diversion.
Ideal for holding the riser pipe in place when the filter system head is removed for inspection or material changes. It can be installed in any system with 1" riser pipe - please ask if you want one installed when buying a complete system